Quick & Easy Repair

3x Harder then OEM VB Plates

Fits all valve body plates using 1/4'' check balls.

Each kit comes with 5 hardened ball seats and "C" Clips

Directions

Step 1) Drill out the worn valve body plate ball seat with a 1/4'' drill bit.

Step 2) File the drilled hole to smooth out burrs caused by drilling in Step 1.

Step 3) Insert the new hardened ball seat with the largest side to the ball side of the plate.

Step 4) Install the "C" clip on the small side of the hardended ball seat.

Step 5) Reinstall the valve body in the transmission.